Voron 2.4 and Trident, BTT Mini12864 Display Case

by Ken226

BTT Mini12864 Display Case for Voron 2.4 and Trident 2020 T slot rail.       I didn't like the default folding design, as over time it tends to get loose. This holds the display firmly, at a 20 degree angle.  To use this case on your Voron, you will need the front skirts from the Voron that is a size small than yours.   For example, on a 300mm Voron, you will need the 250mm size skirts.   On a 350mm Voron, you will need the 300mm front skirts.    For a 250mm Voron, you will need to modify the 250mm skirts in CAD to make them smaller.   I also uploaded the 250mm and 300mm skirts alongside this model, for your conveniece.  They are direct uploads from the Voron website, and are covered under the GNU3.0 license.  The Display housing is of my own design.   To assemble this display case, you will need the following: 2x m3x8 socket head cap screws and 2x m3 t-slot nuts (mounts the same way the skirts do)   4x m3x10mm socket head cap screws 4x m3x4mm (standard voron size) heat set inserts Super glue, to glue the bezel accent insert into the bezel.   The bezel and bezel accent insert both have surfaces with very shallow angles, so should be printed using at most, a 0.2mm first layer, and 0.1mm subsequent layers.   I included .stp files in case anyone needs to modify a part for their own application, or remix something.