PC4-M10 Nut and washer

by CollinsTech

I couldn't find a nut to attach the PC4-M10 coupler, as it requires a custom thread pitch. I made this for making a dry box to hold my spools. I hope this upload helps some users who are interested in making their dry boxes. No support is required for printing! Assembly Instructions : 1) Press the Washer to the PC4-M10 Coupler as shown in the picture 2) Drill holes in the plastic container with 3/8" drill bit 3) Insert the coupler through the hole and screw in the nut. 4) Only hand tighten the nut - Overtightening could break the threads as the threads are tiny. Thread strength depends on the material used PS: Ensure the that hole is drilled in a uniform surface, to have a seamless joint between the washer and nut. I made a mistake as shown in picture and closed the hole with tape on both sides :)