Case_MKS Gen 1.4 + Raspberry Pi3 + Mosfet

by Luca_2495

I recently decided to change the motherboard of my 3D printer and I bought a MKS Gen 1.4, so I decided to design a case to hold the Board, the Mosfet for the bed and the Rasperry Pi3 I use to control the printer. You'll need: - MKS Gen 1.4 (https://bit.ly/2Hj7Pyj) - Raspberry Pi 3 - Mosfet (https://bit.ly/2HdAXa8) - Fan 120mm Below are a list of fasteners required: - 16pcs M3 nuts - 24pcs M3 x 10mm - 4pcs M3 x 18mm Partition: Nuts: - 4pcs M3 nuts to fix the *120mm fan* to the *Cover_Case* - 4pcs M3 nuts to fix the *120mm_Fan_Cover* to the *120mm fan* - 4pcs M3 nuts to fix the *Cover_Case* to the *Mother_Board (with text or without text)* - 4pcs M3 nuts to fix the *Mother_Board (with text or without text)* to the *Support_MB* Screws: - 4pcs M3 x 18mm to fix the *Cover_Case* to the *Mother_Board (with text or without text)* - 12pcs M3 x 10mm to fix the *MKS* , the *Mosfet* and the *Pi3* to the *case* - 4pcs M3 x 10mm to fix the *Mother_Board (with text or without text)* to the *Support_MB* - 4pcs M3 x 10mm to fix the *120mm fan* to the *Cover_Case* - 4pcs M3 x 10mm to fix the *120mm_Fan_Cover* to the *120mm fan* If you want to add a fan dedicated to the raspberry, you can use support Support_fan_50 or 40mm_raspi using M3x35mm and M3x10mm screws. - 4pcs M3 x 35mm to fix the *Support_fan_raspi* to the *Mother_Board (with text or without text) to the Support_MB* - 4pcs M3 nuts to fix the *40mm or 50mm fan* to the *Support_fan_raspi* - 4pcs M3 x 10mm to fix the *40mm or 50mm fan* to the *Support_fan_raspi* The support can be mounted directly on the frame of the AM8 or in general on a 2040 aluminum profile. **Happy printing!** ====================================================================