Diabetes Testing Supply Organizer (with STEP file)

by MyStoopidStuff

This is an organizer for diabetes testing supplies, with removable bins for the consumables.  I have made efforts to make sure this model works well, and the family member who I gave it to, still uses it every day.  However, since this model is designed to hold diabetes testing supplies, I have to add that if you make or use this design, it is at your own risk.   It includes the following design elements: The front left compartment is designed to hold swabs (54x25mm).  The large compartment is intended for a meter (53x22mm) and the one in front (left) is for a box of testing strips (20x40mm).  There is also a long compartment which can be used for anything else (83x27mm).  All the compartments are approx 37mm deep.  Additionally there are three places for pens which are 21mm in diameter.  The pen holes can be customized using some inserts, and there are 3 different diameters provided to fit different pen sizes (16.6, 18.0 and 19.7mm). The pen inserts and box lids could also be used for color coding. The boxes are designed to be removable so they can easily be refilled, dumped out, cleaned or replaced. I only had a couple meters, pens and other items to check dimensions on, so hopefully the compartments will be large enough for multiple types of equipment. The STEP file is also available here for easy remixing. The model is 206 x 94mm so it will fit on an Ender3 or similar sized printers. To assemble the boxes you will need the following: 4x M3 Brass inserts which are 4mm in diameter and 3mm long (upto 5mm may work, but will stick out a bit). - Now Optional - see note below 4x M3 x 20mm round head screws (this is a suggestion, you can use any size longer than 10mm)  Note: There is now an untested insert box model (Diabetes_Testing_Caddy10C-BOX-NO-INSERTS.stl) which does not require the M3 brass inserts . It will still require the M3 screws, and maybe add some glue to keep them from working their way out. If you use the mod