USMC - EGA Tribal Phone Stand

by Rithm3D

To all my Devil Dogs!  Need to put you phone somewhere so you don't lose it?  When Field-day Inspection comes and wanna show off how Moto you are?  How about looking Moto-stylish at work?  Then print one of these in various colors, add stickers, or even paint on it! **PRINTING RECOMMENDATIONS ** Print this lying on its side at full scale.  Fits mostly, iPhones and certain Android phones. Can be printed on an Ender 3 or equivalent.  See picture for print out. Looks even better when using a resin printer.  See pictures for support setup and the time it takes to print on an SLA/LCD type printer that uses resin. Best Printed with the below settings using Cura Slicer: **NOTE:  Supports should be blocked everywhere, except for middle area where the phone would sit.   Print Quality :  Standard or Higher Print Wall :  Layers - 3 or 4 and select “Optimize Wall Printing Order”. Print Top/Bottom :  Top/Bottom Layers - 4. Infill :  Density: 10-20% Print Speed :  40 mm/s for the “Outer Wall” speed and everything else at 50-70 mm/s.   If using translucent filaments, I recommend using the setting below : Print Quality :  Detailed or Higher Print Wall :  Layers - 2 and select “Optimize Wall Print Order” Infill :  0%  Print Speed :  30 mm/s for the "Outer Wall" speed.  Everything else at 40 mm/s.