Christmas Wheel / Vánoční kolo

by Majdy

Christmas wheel with Christmas ornaments and gondolas, inspired by the shape of Benchy, with a touch of inspiration from CORE One :) No need to change filament between layers or use MMU; everything is created in an assembly style—one extruder, multiple colors. The design requires no supports, but the lights need a brim and should be printed upside down.   Vánoční kolo s vánočními ornamenty a gondolami inspirovanými tvarem Benchy. Navíc drobná inspirace z CORE One :)  Není potřeba výměna filamentu ve vrstvách nebo MMU, vše vytvořeno ve stylu skládačky - jeden extruder - více barev. Vše tistěno bez podpěr, pouze u světýlek je nutný límec a tisk vzhůru nohama.   9.12.: Main axle with snowflake design and STL files was added 9.12.: Hlavní osa s designem sněhové vločky a STL soubory byly přidány       Instructions for assembly: / Pokyny pro složení: Assemble the colored parts together Insert the beams into the floor - you may need to use a little force. First, insert the front wheel (which has a larger diameter for the Benchy axle) between the beams, and then slide the main axis in so that it aligns with the wheel Insert the spacer roller into the wheel axle and then slide the main axle a little further. Insert the rear wheel and slide the axle completely into the grooves. Secure the shaft with the nut. Use the Benchy axia to secure all the Benches to the wheel. Do not use the cotter pins yet, fix all the Benchys first to balance the bike. Now secure all Benchy axis with cotter pins - use a small screwdriver to push them in. If you want to use lighting, place it in the base now. Place the completed part on the base. Place the railings- note the 2x shorter railings and the different parts for the right and left sides of the stairs - if the model will not disassemble, secure the handrail with a drop of glue. You're done!   Thank you and Merry Christmas   Zkompletujte dohromady barevné díly Nasuňte nosníky do podlahy - musíte použít t