Rotating flag holder (for many pole diameter)

by Patryk

A rotating flag holder that allows the flag mounted on the pole to rotate freely on the pole/staff. This is a flag mount with mounting eyelets (minimum inner diameter ~7 mm, so that a Multiboard Small Thread screw can pass through it). Each plate has a different internal size - the diameter of the pole/mast. From 16 mm (16.4) to 28 mm (28.4). Each plate v1.1 includes (longer bolt, additional locking nut):1x Bracket for the pole (with the selected pole diameter) [Main Part A]1x Rotating flag holder [Main Part B]1x MB Small Thread T-Bolt2x MB Lock for the T-Bolt2x MB Small Screw Each plate v1 includes:1x Bracket for the pole (with the selected pole diameter) [Main Part A]1x Rotating flag holder [Main Part B]1x MB Small Thread T-Bolt1x MB Lock for the T-Bolt2x MB Small ScrewIf you want to attach the flag to two eyelets, print twice... The pole mount (mast) has 2x Multiboard Small Thread holes + 2x screw holes (4 mm diameter) so that it can be locked onto the pole if necessary. In the case of the upper mount (upper handle), this is necessary to prevent it from falling. The lower mount (lower handle) can usually move freely, but if necessary, it can also be secured. Version v1.1 includes a longer bolt (T-Bolt) and two nuts to secure the flag more securely. This is useful in higher winds, where the standard mount (v1) could potentially come loose in some situations. Keep weather conditions in mindIf the handles are to be used outdoors, especially in a place exposed to UV radiation, it is worth considering a filament that will be resistant to it (e.g., PET-G, ASA). However, I have had PLA handles on my pole for several months and have had no problems with them.