Open car with high side 60T E.A.N.O.S.

by Chrisphil

Here is my interpretation of the E.A.N.O.S Wagon from [ByFyzi](https://www.thingiverse.com/byfyzi/designs) the chassis is clipped into the box, the pads are pushed into the holes provided for this purpose, no need for glue The metal axles come from [AliExpress](https://aliexpress.com/item/1005001962523358.html) , you may have to adapt the length of the bogie crossbar to fit your axles For the complete STL file, I used the axles of [isidrodaniel](https://www.thingiverse.com/thing:4914794) , but I did not adapt the bogies to these printed axles I planned two types of bogie, one with a NEM box (to be able to adapt it to your trains) the other with a coupling inspired by the one of [ByFyzy](https://www.thingiverse.com/thing:5252770) which works very well and is easy to print The coal loading, (not very suitable for this type of car, but quick to adapt) comes from the design of [3d-druckfactory](https://www.thingiverse.com/thing:3200942) the bogies are fixed with M4 x 5 screws directly screwed in the hole of the chassis, with a 1mm thick washer between bogie and chassis, the set of metal axles + M4 screws + 1mm steel washers is used as ballast to the wagon, to lower its center of gravity. I bought my screws at my usual hardware store, but you can find them here Flat head screws on [AliExpress](https://aliexpress.com/item/1005003743065403.html) and Flat washers [AliExpress](https://aliexpress.com/item/1005002148389665.html). Good impression If you print this wagon, please upload your pictures in a [Make on Thingiverse](https://www.thingiverse.com/thing:5340678/make) or in [Make on Cult3d](https://cults3d.com/fr/impression-3d/nouveau?creation=wagon-ouvert-a-flanc-haut-60t-e-a-n-o-s) : it's my best pay. And, if you want to help me pay for the PLA used for the prototypes of this scale model, I accept donations at [buymeacoffee.com](https://www.buymeacoffee.com/christianny). **Thanks in advance**