Smatjes Drybox Drybox V1

by Smatjes

Filament drying box 8€ You can create this filament drying box for less than €8. ! Space-saving because there are no PTFE hoses in the way ! The box is not damaged ! No drilling ! No ball bearings required ! You can reuse the box at any time for muesli or whatever. No holes are drilled and nothing is glued in! In addition to the filament, you need - 1 pc. 4 liter storage can approx. 4 - 5 € per piece, e.g. this one here :https://www.amazon.de/dp/B08JTH2NZJ?ref=ppx_yo2ov_dt_b_product_details&th=1 But any other with the same lid principle will do. (price varies) - 1 pc. PC4-M6 or PC4-M10 approx. 0,50 € per piece - 1 pc. hygrometer round Thlevel approx. 2,50 € per pc. - Silica gel approx. 0.20 € per box = Total cost from approx. € 7.20 per box. The complete box goes on a printing plate at 220x220 mm Optionally, you can also print the funnel with which you fill the silica gel. It is also a measuring cup that you fill once and then have the correct filling quantity. The file for the funnel is included. The parts are plugged in and then hold. The connection of the hygrometer, if you want to use one, could do with a drop of glue. Screw the PC4 into the cover for the outlet. You get one cover with an M6 thread and one with an M10 thread. If you want to install a hygrometer, the connection could do with a drop of glue. Illustrated instructions are included with the download! You can then store the boxes with the lid down on the shelf and from there you can also feed them directly to your printer and print from the box. In my very humid room, the humidity drops to 20% after 2-3 days. That's enough thickness. You don't need an extra electric filament dryer. As you can see in the picture below, you can also store them turned. This saves some space. In the picture you can see a previous version of the hygrometer holder in boxes 1 and 3 from the left. When you no longer need it for your filament, you can simply store your cereals in it again. I store all types of filament in it,