M2 FPV flying wing - Koza

by AlPo15

M2 FPV flying wing The model is designed from scratch, based on the experience of operating the previous model. The basic idea is a fully modular design. Almost the entire aircraft is assembled on ordinary self-tapping screws 3 * 16 / 20mm In case of damage it is not necessary to reprint the entire aircraft, only the damaged part and it is easy to replace. The parts to be glued are the 3-piece cockpit, landing wheel and battery platform, glued to the central part of the fuselage. Wingspan - 1150 mm weight with battery 4s 21700 - 1150g Motor - Emax 2807 / 1300kv speed controller - 40A servos - 2 x Emax es09md flight controller - Matek f405vmn video DJI Air unit o3 95% of the aircraft is printed from LW PLA with Heroid infill. The model used about 500g of LW PLA and about 60g of regular PLA+ The center of gravity is located at a distance of 25-30 mm from the leading edge of the wing. https://youtu.be/Xmu0KhTpzLs https://youtu.be/aJ_meQnKKpg Recommended exponent 60% on pitch and roll control Preparation for printing takes place in the Prusa slicer. In version 2.5, it is necessary to turn on the classic model slicing engine Files in *.3mf format, in which, in addition to the graphics themselves, there are all the settings for printing LW PLA. It is enough to change the size of your table for printing and just click cut. Parts from PLA are listed separately and you can use your own settings if you want. For printing you need LA PLA - about 500g PLA - about 60g Tube 10mm - 1000mm long (carbon or aluminum) Pieces of filament are used as joint guides. 2 Emax 09MD servos Motor Emax 2807 1300kv ESC 30-40A Prop 7*5 - 8*6 battery 4S 4000 (21700) or 4s3000 (18650)