Legs for Station G2, to stand the unit upright

by SomeGuy2023

I tested the stock G2 Antenna with my nano VNA and discovered that the SWR is very poor when it comes to having the antenna bent 90 degrees. The solution I found was to stand the unit upright. Even in a straight configuration the antenna SWR was still not a perfect 1.1, but better. Print: print one normally (might have to rotate it, to avoid supports) and mirror the other one (again, rotate if needed to avoid supports) Install is simple. Remove one screw and nut from the bottom of the G2 and replace the spacer with the leg. Then repeat it with the second screw and nut. You can use a 90deg USB-C connector from Amazon to power the unit.